
S-DGAS 99 Kit
Available in complete kits or as Components. For shorter sizes purchase kit length greater than size needed and modify on site. For longer lengths build components up to desired length.

DA 6532
Circular perforated grate for S-DGAS 65, S-DGAS 99, FXDG 65, FFDG 65, FTDG 65
16 gauge, 304 stainless steel
31-7/8″ L x 2-1/2″ W x 1″ H
Finishes: Satin Stainless -SS, Polished Stainless – PS

DA 6536
Circular perforated grate for S-DGAS 65, S-DGAS 99, FXDG 65, FFDG 65, FTDG 65
16 gauge, 304 stainless steel
35-7/8″ L x 2-1/2″ W x 1″ H
Finishes: Satin Stainless -SS, Polished Stainless – PS

DA 6542
Circular perforated grate for S-DGAS 65, S-DGAS 99, FXDG 65, FFDG 65, FTDG 65
16 gauge, 304 stainless steel
41-7/8″ L x 2-1/2″ W x 1″ H
Finishes: Satin Stainless -SS, Polished Stainless – PS

DA 6548
Circular perforated grate for S-DGAS 65, S-DGAS 99, FXDG 65, FFDG 65, FTDG 65
16 gauge, 304 stainless steel
47-7/8″ L x 2-1/2″ W x 1″ H
Finishes: Satin Stainless -SS, Polished Stainless – PS

DA 6560
Circular perforated grate for S-DGAS 65, S-DGAS 99, FXDG 65, FFDG 65, FTDG 65
16 gauge, 304 stainless steel
59-7/8″ L x 2-1/2″ W x 1″ H
Finishes: Satin Stainless -SS, Polished Stainless – PS

SC 6548
Stainless steel open ended channel for S-AS 65/99, S-DGAS 65/99
Waterproofing: PVC/Vinyl liner, Lead/copper pan, Hot mop, Rubber liner (Chloraloy®), Fiberglass
Requires SE 65 ends sections to close channel + outlet assembly
Join channel lengths with GJS 65 straight joiner or SLA 65 angle joiner
48″ L x 2-7/8″ W x 1″ H
Finishes: Satin stainless steel (SS), Polished stainless steel (PS)

SC 6596
Stainless steel open ended channel for S-AS 65/99, S-DGAS 65/99
Waterproofing: PVC/Vinyl liner, Lead/copper pan, Hot mop, Rubber liner (Chloraloy®), Fiberglass
Requires SE 65 ends sections to close channel + outlet assembly
Join channel lengths with GJS 65 straight joiner or SLA 65 angle joiner
96″ L x 2-7/8″ W x 1″ H
Finishes: Satin stainless steel (SS), Polished stainless steel (PS)

LC 6528
Stainless steel closed ended channel for S-AS 65/99, S-DGAS 65/99
Waterproofing: PVC/Vinyl liner, Lead/copper pan, Hot mop, Rubber liner (Chloraloy®), Fiberglass
Requires outlet assembly
28-1/4″ L x 2-7/8″ W x 1″ H
Finishes: Satin stainless steel (SS), Polished stainless steel (PS)

LC 6540
Stainless steel closed ended channel for S-AS 65/99, S-DGAS 65/99
Waterproofing: PVC/Vinyl liner, Lead/copper pan, Hot mop, Rubber liner (Chloraloy®), Fiberglass
Requires outlet assembly
40-1/4″ L x 2-7/8″ W x 1″ H
Finishes: Satin stainless steel (SS), Polished stainless steel (PS)

LC 6552
Stainless steel closed ended channel for S-AS 65/99, S-DGAS 65/99
Waterproofing: PVC/Vinyl liner, Lead/copper pan, Hot mop, Rubber liner (Chloraloy®), Fiberglass
Requires outlet assembly
52-1/4″ L x 2-7/8″ W x 1″ H
Finishes: Satin stainless steel (SS), Polished stainless steel (PS)

LC 6564
Stainless steel closed ended channel for S-AS 65/99, S-DGAS 65/99
Waterproofing: PVC/Vinyl liner, Lead/copper pan, Hot mop, Rubber liner (Chloraloy®), Fiberglass
Requires outlet assembly
64-1/4″ L x 2-7/8″ W x 1″ H
Finishes: Satin stainless steel (SS), Polished stainless steel (PS)

LC 6588
Stainless steel closed ended channel for S-AS 65/99, S-DGAS 65/99
Waterproofing: PVC/Vinyl liner, Lead/copper pan, Hot mop, Rubber liner (Chloraloy®), Fiberglass
Requires outlet assembly
88-1/4″ L x 2-7/8″ W x 1″ H
Finishes: Satin stainless steel (SS), Polished stainless steel (PS)

CDI 43
Cast iron clamp down floor drain
4″ throat, 3″ no hub outlet
8″ overall diameter
Waterproofing: PVC/Vinyl liner, Lead/copper pan, Hot mop, Rubber liner, Fiberglass

CDA 43
ABS clamp down floor drain
4″ throat, 3″ outlet
8″ overall diameter
Waterproofing: PVC/Vinyl liner, Lead/copper pan, Hot mop, Rubber liner, Fiberglass

CDP 43
PVC clamp down floor drain
4″ throat, 3″ outlet
8″ overall diameter
Waterproofing: PVC/Vinyl liner, Lead/copper pan, Hot mop, Rubber liner, Fiberglass

CDIT 43
Cast iron clamp down floor drain
4″ throat, 3″ female threaded outlet
8″ overall diameter
Waterproofing: PVC/Vinyl liner, Lead/copper pan, Hot mop, Rubber liner, Fiberglass

CDIC 43
Cast iron clamp down floor drain
4″ throat, 3″ inside caulk outlet
8″ overall diameter
Waterproofing: PVC/Vinyl liner, Lead/copper pan, Hot mop, Rubber liner, Fiberglass

CDIS 42
Cast iron clamp down floor drain with integral trap
4″ throat, 2″ female threaded side outlet
63/4″ overall diameter, 53/16″ overall height
Waterproofing: PVC/Vinyl liner, Lead/copper pan, Hot mop, Rubber liner, Fiberglass

CDIQ 42
Cast iron clamp down floor drain
4″ throat, 2″ outlet
8″ overall diameter
To adapt to 2″ throat add ERB
Waterproofing: PVC/Vinyl liner, Lead/copper pan, Hot mop, Rubber liner, Fiberglass

GJS 65
Stainless steel joiner strip for S-AS/DGAS 65 Series

SE 65
2″ stainless steel end section for S-AS 65 Series
For use with SC 65 open ended channel
Available in satin stainless steel (SS) or polished stainless steel (PS)

SLA 65
Stainless steel 90ư angle joiner for SC/LC channel
Requires (2) GJS 65 stainless steel straight joiner strips
Available in satin stainless steel (SS) or polished stainless steel (PS)

UCP 4
Universal 4″ throat clamping plate – cast iron
8″ overall diameter
Allows adaptation to 8″ diameter drain bodies: Zurn, Smith, Wade, watts, Mifab, and Josam
Works with TD 15 and TD 20
To adapt to 2″ throat add ERB eccentric reducer bushing

DKEY
S-DG 38, S-DG 65, S-DGAS 65, S-DGAS 99
FXDG 65, FXMN 65, FFDG 25, FFDG 65, FFMN 25, FFMN 65
FTDG 25, FTDG 65, FTMN 25, FTMN 65
LTD5-2, LTD5B, RTD 15, RTDB 15, TD 15, TDB 15, TD 20, TDB 20, TD 50
LW5-2, G1, G2, G3, G4

CT 36
36″ Length stainless steel trim to cover assembled channel edge

CT 40
40″ Length stainless steel trim to cover assembled channel edge

CT 48
48″ Length stainless steel trim to cover assembled channel edge

CT 60
60″ Length stainless steel trim to cover assembled channel edge

CT 72
72″ Length stainless steel trim to cover assembled channel edge

CT 80
80″ Length stainless steel trim to cover assembled channel edge

CT 96
96″ Length stainless steel trim to cover assembled channel edge

TNRN-4
4″ cast iron straight threaded extension
1 5/8″ minimum extension
For use with FXAS 125, RTD 15-2, RTD 15-3, TD 15-2, TD 15-3, TD 20-2 and TD 20-3

LF 99
8″ stainless steel high flow outlet section for S-AS/DGAS 99 Series
Requires (2) GJS 65 joiner strips
Available in satin stainless steel (SS) or polished stainless steel (PS)
Standard Wall Conditions
